HP 2400 2450 (Q3090A-Japan only) manual problem, follow these steps, hp director on page

Models: 2400 2410xi (Q3088A)

1 166
Download 166 pages 62.29 Kb
Page 149
Image 149
reinstall it as described in Some of the icons are missing in the

troubleshooting information

problem

possible cause and solution

A red X or yellow triangle appears on the USB connect prompt

follow these steps

1Verify that the front panel cover is firmly attached, then unplug the HP PSC and plug it in again.

2Verify that the USB and power cables are plugged in.

 

3 Verify that the USB cable is set up properly as follows:

 

Unplug the USB cable and plug it in again.

 

Do not attach the USB cable to a keyboard or non-powered

 

hub.

 

Verify that the USB cable is 3 meters or less in length.

 

If you have several USB devices attached to your computer,

 

you might want to unplug the other devices during the

 

installation.

 

4 Continue with the installation and reboot the computer when

 

prompted. Then open HP Director and check for the essential icons

 

(scan picture, scan document, and hp gallery)

 

5 If the essential icons do not appear, remove the software and then

 

reinstall it as described in Some of the icons are missing in the

 

hp director on page 140.

 

 

I received a message

Try to continue with the installation. If that doesn’t work, stop and then

that an unknown error

restart the installation.

has occurred

 

troubleshooting

reference guide

139

Page 149
Image 149
HP 2400 2450 (Q3090A-Japan only), 2400 2420 (Q3085A) problem, follow these steps, hp director on page, troubleshooting