use the fax features
receive a fax manually
If you set up your HP PSC to receive faxes manually, you will need to respond in person to the incoming fax call.
1When your HP PSC rings, pick up the handset of a telephone that is on the same telephone line as your HP PSC.
2If you hear fax tones, do one of the following:
–If your telephone is plugged into the back of the HP PSC, press Fax, and then Start Black or Start Color.
–If your telephone is not plugged into the back of the HP PSC but is on the same telephone line, press 1 2 3 on your telephone.
3Wait for the fax tones, and then hang up the telephone.
set the fax header
The fax header prints your name and fax number on the top of every fax you send. We recommend that you use the Fax Setup Wizard during the
HP software installation to set up the fax header; however, you can also set it up from the front panel.
The fax header information is required by law in many countries.
Note: In Hungary, the subscriber identification code (fax header) can be set or changed only by authorized personnel. For more information, contact your authorized HP dealer.
1Press Setup.
2Press 3, then press 2.
This selects Basic Fax Setup and then selects Fax Header.
3After Your Name appears, enter your name using the numeric keypad and then press OK.
For information on entering text, see enter text on page 62.
4Using the keypad, enter your fax number.
5 Press OK.
You might find it easier to enter fax header information by using the Fax Setup Wizard in the HP Director software that you installed with your HP PSC. In addition to entering fax header information, you can enter cover page information. This information will be used when you send a fax from your computer and attach a cover page.
For more information, see the onscreen hp photo & imaging help that came with your software.
fax
reference guide | 61 |
