Back to TOC
Scanning to another program
On some models, you can select from a list of destinations (including the HP Precisionscan Pro software) on the front panel LCD display, then scan directly to the selected destination.
When you select a program other than HP Precisionscan Pro using the
Select Destination button ( 
), the scanner will automatically use settings optimized for the destination you choose. You do not view or change scanned images before they go to the destination.
To scan directly to another program
1Close the HP Precisionscan Pro and HP Scanjet Copy Utility programs if they are open on your computer.
2Place the original face down on the scanner glass and close the lid. To load items in the ADF, see "Scanning from the ADF" on
page 76.
3If your scanner has a Select Destination button next to the Scan To
button ( ), press the Select Destination button up or down until the destination you want to scan to is listed in the scanner’s LCD window.
4Press the Scan To button on the front panel of the scanner.
5The item is scanned using settings optimized for the program you selected. The program launches and the scan is sent to the program.
Scanning from scanner buttons | 27 |
Note: For information about updating the destinations for scanner buttons, see "Changing settings for buttons" on page 34.
Tip If your scanner does not have a Select Destination button next to the Scan To button, you can scan to other programs through the HP Precisionscan Pro software. See "Sending to a program" on page 61.