HP 72SI, 98SI manual AutoTune

Quality Check When you run AutoJet manually, the software notifies you if there are any jet or alignment problems so that they can be addressed. When AutoTune runs AutoJet at scheduled intervals, you can use the Quality Check feature to handle AutoJet errors.

When Quality Check is enabled, if any missing jets are found that are not substituted by a working jet, the operator can be alerted by the control panel or the job can be routed to the Attention queue on the ColorSpan print server.

1.On the Front Page screen, press the  (Menu) key to enter the menu system.

2.Press the ) key repeatedly to highlight Printer Settings.

3.Press the  (Menu In) key display the Printer Settings menu.

4.Press the ) key repeatedly to highlight Quality Check.

5.Press ! (Proceed).

The control panel displays the Quality Check options.

◆Attended Mode — user must press ! (Proceed) to

acknowledge the error and print the job (if one is pend- ing), or  (Cancel) to cancel printing.

◆Unattended Mode — no user acknowledgment of errors is required. When a quality check fails, print jobs are sent to the ColorSpan print server’s Attention queue with a disposition of “Uncalibrated Printer” (this feature may not be supported by non-ColorSpan RIPs).

◆OFF — no quality check is performed, all jobs will print.

6.Select a Quality Check option.

7.Press the  (Menu Out) key repeatedly until the Front Page screen is displayed. Press the Online/Offline button to return the printer to the Ready state.

AutoTune 4-5