1.From the control panel Front Page screen, press the Prime Bars key.
The control panel displays a prompt asking you to enter the total width of the prime bar pattern you wish to print.
2.Enter a width for the prime bar pattern by pressing the ) and , keys.
3.Press the ! (Proceed) key to continue.
The printer prints the prime bar pattern. The prime bars will show correctly working jets with a solid line, and missing jets with no line.
When prime bars indicate missing or deflected jets, automatic jet maintenance should be supplemented by a
You can purge all sixteen printheads at once or purge a single color (four printheads).
To
1.From the control panel Front Page screen, press the Purge key.
The control panel prompts you to press the ! (Proceed) key to continue.
2.Press the ! (Proceed) key to continue.
The printer purges the printheads with air pressure, then wipes them with the service station wipers. Approximately 1 milliliter of ink per color is expelled by this purge.
Checking Jet Health |