HP 98SI, 72SI manual Front

◆Status — displays system parameters and the status of all user-configurable options. Press the  and  keys to scroll between pages. To change an option, go to the Printer Con- figuration section of the menu.

Fig. 2-4. Status page 1

◆Print Mode — sets print quality mode. See “Selecting a Print Mode” on page 3-4 for instructions.

◆Advance Media — press the ) key to advance the media for- ward. When you press and hold the ) key, the media moves faster. Press the , key to reverse the media back onto the supply spool. When you press and hold the , key, the media moves faster. You can also press the Media Advance rocker switch, mounted on the OHS near the postheater, to move the media in either direction.

◆Menu — displays the complete printer menu for access to advanced configuration options (see “Menu” on page 2-9 for instructions).

◆AutoJet — detects deflected and non-firing jets, and substi- tutes working jets for them (in Production and Quality modes).

◆Prime Bars — fires all jets by drawing a set of lines called prime bars. This is a good way to inspect and prepare the jets for printing after they have been idle (see “Print Prime Bars” on page 3-8). You can also print a similar pattern called Print Jet-Out Lines, which shows which jets have been detected and replaced by AutoJet (see page 2-14 for details).

2-6 Front Page