3.When the calibration pattern has printed, the control panel displays a menu with the following options:

◆Report individual soft bad jets — enables you to report a “soft” bad jet, which can be automatically reenabled if AutoJet finds it working.

◆Report individual hard bad jets — enables you to report a “hard” bad jet, which will not be checked or reen- abled by AutoJet.

◆Clear individual bad jets — enables you to clear (mark as good) a jet.

◆View current bad jets — lists the bad jets on a given printhead.

◆Clear all bad jets — clears (marks as good) all jets cur- rently marked as unusable.

Select an option and follow the corresponding procedure below.

Report Individual Bad Jets

When you select Report Individual Bad Jets, the control panel displays the following prompt:

Head 1:

Press Proceed to report a bad jet.

4.Press , and ) to select a head number, then press ! (Proceed).

Manual Calibrations

4-15