Replace Ink Filters
The control panel displays a Warning message on the control panel when 20 liters of ink has passed through the filters. Replace all five the filters as a set. Failure to replace the filters when recommended will eventually cause the filters to clog and prevent ink from reaching the printheads.
Have a paper towel ready to catch the small amount of ink or cleaning solvent that will spill out of some of the tubes and the filter itself as you disconnect them. The reservoir shelf is designed to catch these spills for easier cleanup. You may also want to wear protective gloves during this procedure.
1.Disconnect the tube from the ink box.
2.Remove the ink box from the shelf.
3.Use a Phillips screwdriver to loosen the filter clamp.
Connector
Filter
Clamp
Connector
Fig.
4.Unscrew the hose connectors from filter.
5.Remove the old filter.
6.Install the new filter into the filter clamp.
Replace Ink Filters |