HP 98SI, 72SI manual Maintenance

◆ Idle Spits — when the printer is idle, it automatically spits a small amount of ink into the service station to keep the ink- jets open and working. To reduce the amount of ink con- sumed during idle spitting, you can set the operation to Medium or Low. To ensure that the printheads are always at maximum readiness, use the High setting.

◆ Low Ink Warning — defines the amount of ink remaining in the ink box supply at which the printer will display a “low ink” message on the control panel.

◆ Printer Name — displays a keypad to change the printer name displayed on the control panel and RIP or ColorSpan Print Server. Alternatively, the printer name can be changed from the ColorSpan Print Server.

	◆ Restore All Defaults — restores all Printer Configuration set-
	tings to their factory default values, and zeroes all registra-
	tion data. After running this option, all calibration values
	must be reestablished by running AutoSet or manual calibra-
	tions.
Maintenance	◆ Access Printheads — moves the printhead carriage out from
	the service station to the capping station. This is the same
	functionality as the Access Heads button on the Front Page.
	◆ Purge A Color — purges the four printheads of a single color,
	rather than all sixteen printheads. This is helpful when recov-
	ering stubborn jet-outs.
	◆ Print Jet-Out Lines — prints a version of the prime bars (see
	page 2-6), in which missing jets that are replaced are
	marked with a black square.
	◆ Fill Service Station — fills the service station reservoir with
	cleaning solvent.
	◆ Reset Reservoir Filters — after you replace the ink reservoir
	filters, select this option to reset the ink counts to zero. See
	“Replace Ink Filters” on page 5-19 for instructions.
	◆ Respool Media — this option enables you to respool media
	from the supply directly to the takeup (in either direction)
	without passing over the heaters or platen.
	◆ Clean Grit Rollers — advances the grit rollers continuously so
	they can be cleaned (with no media loaded).
	◆ Capping Purge — enables you to disable or enable the purge
	that is automatically performed prior to capping.

2-14 Menu