HP 98SI, 72SI manual Enter the length of the media, Press the ! key

4.Enter the length of the media.

The printer will use the value you enter here for subsequent calculations, so be as accurate as possible.

5.Press the ! key.

The control panel displays the prompt:

Load a sheet of media onto the printer

6.Unload any roll-fed media from the printer.

7.Insert the pins of the media alignment tool into two platen vacuum holes (in the same row).

Fig. 3-15. Media alignment tool

8.Release the pinch rollers.

9.Slide a sheet of media onto the platen and center it on the pinch rollers.

It is not necessary to align the media to the left or right edge of the platen. If possible, avoid positioning the left or right edge of the media under a pinch roller. If this is unavoid- able, see “Releasing a Pinch Roller,” on the next page.

3-32 Loading Rigid Media