Manual Jet Mapping Jets that are missing or misfiring are usually detected by the AutoJet calibration. Alternatively, you can map out jets manually using the Manual Jet Mapping function. You may want to manually map weak or misdirected jets that AutoJet does not substi- tute.
Tip | AutoJet is the automatic version of this calibration |
| (see “AutoJet” on page |
|
|
|
|
Tip | For best results, print the prime bars and purge the |
| printheads as necessary to ensure the maximum |
| number of working jets. See “Checking Jet Health” |
| |
|
|
1.On the Manual Calibrations menu, press the ) key repeat- edly to highlight Manual Jet Mapping.
2.Press the (Menu In) key to select the option.
The control panel displays this message:
Print Jet Map?
If you have a calibration pattern from a recent print, you can use it to calibrate the heads. Press ( (Cancel) and go to the next step. Otherwise, press !.
Manual Calibrations |