HP CD/DVD Tattoo labels
▲Place one sheet of CD/DVD tattoo paper in the input tray with the print side down; slide the CD/DVD tattoo paper forward until it stops.
NOTE: When you use CD/DVD tattoo labels, leave the tray extender closed.
Related topics
•“Change the print settings for the current job” on page 28
•“Recommended papers for printing” on page 15
Load a CD/DVD
In addition to printing on paper, the HP Photosmart enables you to print directly on the surface of specially coated CDs and DVDs for print jobs started from a connected computer. You can design and create a custom label for your CD or DVD using the software that came with the HP Photosmart. You can then print the label on your printable CD or DVD media.
TIP: It is recommended that you write your data to the CD or DVD before printing the label on it.
NOTE: The HP Photosmart does not support a CD/DVD print job started from the control panel.
To load a CD/DVD on the CD/DVD tray
1.Carefully remove the CD/DVD holder that came with the HP Photosmart. The CD/DVD holder is stored below the main input tray.
Load paper
Load a CD/DVD | 23 |