6.Clean the face and edges around the ink nozzle area with the swab, as shown below.

1Nozzle plate (do not clean)

2Face and edges around the ink nozzle area

CAUTION: Do not clean the nozzle plate.

7.Hold the print cartridge with the HP logo on top, and insert the print cartridge back into the slot. Make sure you push the print cartridge in firmly until it snaps into place.

8.Repeat if necessary for the other print cartridge.

9.Gently close the print cartridge door and plug the power cord into the back of the HP Photosmart.

Related topics

Clean the print cartridges” on page 62

Maintain the HP Photosmart

Remove ink from your skin and clothing

Follow these instructions to remove ink from your skin and clothing:

Surface

Skin

White fabric

Color fabric

Remedy

Wash the area with an abrasive soap.

Wash the fabric in cold water and use chlorine bleach.

Wash the fabric in cold water and use sudsy ammonia.

CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can set the ink into the fabric.

Clean the HP Photosmart

Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the case. The interior of the HP Photosmart does not require cleaning. Keep fluids away from the control panel and the interior of the HP Photosmart.

CAUTION: To avoid damage to the exterior of the HP Photosmart, do not use alcohol or alcohol-based cleaning products.

Clean the HP Photosmart

65

Page 66
Image 66
HP D5300 manual Clean the HP Photosmart, Remove ink from your skin and clothing