Solution: If the HP Photosmart is not properly connected to the computer, communication errors can occur. Make sure the USB cable is securely connected to the HP Photosmart and the computer, as shown below.

For more information, see:

Communication problems over a USB connection” on page 69

Improper shutdown

Cause: The last time the HP Photosmart was used, it was not turned off properly. If the HP Photosmart is turned off by turning off the switch on a power strip or by using a wall switch, the device can be damaged.

Solution: Press the On button located on the control panel of the HP Photosmart to turn the device on and off.

Two-way communication lost

Cause: The HP Photosmart is turned off.

Solution: Look at the display on the HP Photosmart. If the display is blank and the On button is not lit, the HP Photosmart is turned off. Make sure the power cord is firmly connected to the HP Photosmart and plugged into a power outlet. Press the On button to turn on the HP Photosmart.

Cause: The HP Photosmart is not connected to the computer.

Troubleshooting

Errors 123

Page 124
Image 124
HP D5300 manual Improper shutdown, Two-way communication lost