Use this procedure to install the analog fax accessory for the HP Color LaserJet 4730mfp and HP Color LaserJet CM4730 MFP if it is not already installed.

1.Turn off the MFP, and disconnect all cables. Figure 1-11Turning the power off

Figure 1-12Disconnecting the cables

2.Locate the formatter board in the back of the MFP. Figure 1-13Locating the formatter board

NOTE: If this is the first time the fax is installed, remove the small cover over the opening for the phone jack on the rear panel of the formatter before inserting the fax card into the formatter.

ENWW

Installing the fax accessory 13