Set the error correction mode
Normally, the fax accessory monitors the signals on the telephone line while it is sending or receiving a fax. If the fax accessory detects an error during the transmission and the error correction setting is on, the fax accessory can request that the error portion of the fax be sent again.
You should turn off error correction only if you are having trouble sending or receiving a fax and if you are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.
Set the error correction mode on the HP LaserJet 4345mfp and 9040/9050mfp, and the HP Color LaserJet 4730mfp and 9500mfp
1.On the control panel, press the Menu button to open the main menu.
2.Touch FAX to open the fax menu.
3.Touch FAX SETUP OPTIONAL to see the optional setup items.
4.Touch Error Correction Mode to see the settings.
5.Touch ON (default) to enable error correction mode, or touch OFF to disable correction mode.
Set the error correction mode on the HP LaserJet M3025 MFP, M3027 MFP, M4345 MFP, M5025 MFP, M5035 MFP, M9040 MFP, M9050 MFP and HP Color LaserJet CM4730 MFP and CM6040 MFP Series
1.On the control panel, scroll to and touch the Administration icon to open the Administration menu.
2.Touch Initial Setup to open the setup settings menu and then touch Fax Setup.
3.Touch Fax Send Settings to see the settings.
4.Touch Error Correction Mode to see the settings.
5.Touch Enabled (default) to enable error correction mode, or touch Disabled to disable correction mode.
ENWW | Set the error correction mode 61 |
