HP Transcend Traffix Manager Conventions, List conventions that are used throughout this guide

	Conventions	13
Table 1 Where to find specific information (continued)
If you are looking for	Turn to
Information about what’s new in this release of Traffix Manager.	Release Notes
A list of known problems in this release of Traffix Manager.	Release Notes

Conventions	Table 2 and Table 3 list conventions that are used throughout this guide.
	Table 2	Notice Icons
	Icon	Notice Type	Description
		Information note Information that describes important features or
			instructions
		Caution	Information that alerts you to potential loss of data or
			potential damage to an application, system, or device
	Table 3	Text Conventions
	Convention		Description
	Screen displays		This typeface represents information as it appears on the
			screen.
	Syntax		The word “syntax” means that you must evaluate the syntax
			provided and then supply the appropriate values for the
			placeholders that appear in angle brackets. Example:
			To enable RIPIP, use the following syntax:
			SETDefault !<port> -RIPIP CONTrol =
			Listen
			In this example, you must supply a port number for <port>.
	Commands		The word “command” means that you must enter the
			command exactly as shown and then press Return or Enter.
			Commands appear in bold. Example:
			To remove the IP address, enter the following command:
			SETDefault !0 -IP NETaddr = 0.0.0.0
	The words “enter”		When you see the word “enter” in this guide, you must type
	and “type”		something, and then press Return or Enter. Do not press
			Return or Enter when an instruction simply says “type.”
	Keyboard key names		If you must press two or more keys simultaneously, the key
			names are linked with a plus sign (+). Example:

Press Ctrl+Alt+Del

(continued)