HX200/HX200L-2000/HX300/HX300L/HX400

5.1.2. H-Axis Reduction Gear

Attention

If grease is added without removing the outlet plug, it cause damage to the seal of reduction gear and grease will go inside the motor and may damage it. It is absolutely necessary to remove the plug.

■Grease Replenishment

①Make the H-Axis Arm vertical for ground.(H:90°-Floor Type, H:0°-Shelf Type )

② Remove the grease outlet plug.

③ Inject the grease into the grease inlet using a grease gun.

￿Grease type : Molywhite RE00

￿Amount of grease : 300cc

④Wipe the outlet port with a cloth and attach the plug with seal tape.

5-4