Register Description

4.8.7BCC – Base Class Code Register

Address Offset:

0Bh

Default Value:

06h

Access:

Read only

Size:

8 bits

This register contains the Base Class code of the GMCH Device #0. This code is 06h indicating a Bridge device.

Bit

Descriptions

 

 

7:0

Base Class Code (BASEC): This is an 8-bit value that indicates the Base Class Code for the

 

GMCH. This code has the value 06h, indicating a Bridge device.

 

 

4.8.8HDR – Header Type Register

Address Offset:

0Eh

Default Value:

80h

Access:

Read only

Size:

8 bits

This register identifies the header layout of the configuration space. No physical register exists at this location.

Bit

Descriptions

 

 

7:0

PCI Header (HDR): This field always returns 80 to indicate that Device #0 is a multifunction

 

device. If Functions other than 0 are disabled, this field returns a 00 to indicate that the GMCH is a

 

single function device with standard header layout. Writes to this location have no effect.

 

 

4.8.9SVID – Subsystem Vendor Identification Register

Address Offset:

2C-2Dh

Default Value:

0000h

Access:

Read/Write Once

Size:

16 bits

This value is used to identify the vendor of the subsystem.

Bit

Descriptions

 

 

15:0

Subsystem Vendor ID (SUBVID): This field should be programmed during boot-up to indicate the

 

vendor of the system board. After it has been written once, it becomes Read Only.

 

 

D15343-003

55

Page 55
Image 55
Intel D15343-003 BCC Base Class Code Register, HDR Header Type Register, Svid Subsystem Vendor Identification Register