Register Description

4.11.13SVID – Subsystem Vendor Identification Register (Device #2)

Address Offset:

2C-2Dh

Default Value:

0000h

Access:

 

Read/Write Once

Size:

 

16 bits

 

 

 

Bit

Description

 

 

 

15:0

Subsystem Vendor ID: This value is used to identify the vendor of the subsystem. This register

 

should be programmed by BIOS during boot-up. Once written, this register becomes Read Only.

 

This register can only be cleared by a reset.

 

 

 

4.11.14SID – Subsystem Identification Register (Device #2)

Address Offset:

2E-2Fh

Default Value:

0000h

Access:

 

Read/Write Once

Size:

 

16 bits

 

 

 

Bit

Description

 

 

 

15:0

Subsystem Identification: This value is used to identify a particular subsystem. This field should

 

be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This

 

register can only be cleared by a reset.

 

 

 

4.11.15ROMADR – Video BIOS ROM Base Address Registers (Device #2)

Address Offset:

30-33h

Default Value:

00000000h

Access:

Read Only

Size:

32 bits

The IGD does not use a separate BIOS ROM, therefore this register is hardwired to 0's.

Bit

Description

 

 

31:18

ROM Base Address–RO

 

 

17:11

Address Mask–RO:Indicates 256-kB address range.

 

 

10:1

Reserved

 

 

0

ROM BIOS Enable–RO:Indicates ROM not accessible.

 

 

D15343-003

107

Page 107
Image 107
Intel D15343-003 Svid Subsystem Vendor Identification Register Device #2, SID Subsystem Identification Register Device #2