KS152JB Universal Communications Controller
Technical Specifications
Kawasaki LSI USA, Inc. Page 92 of 120 Ver. 0.9 KS152JB2
ARB enables the DMA logic to detect HLD and generate HLDA. After it has activated HLDA,
the C152 will not begin a new DMA to or from External Data Memory as long as HLD is seen to
be active. This logic is disabled when ARB = 0, and enabled when ARB = 1.
REQ enables the DMA logic to generate HLD and detect HLDA before performing a DMA to or
from External Data Memory. After it has activatedHLD, the C152 will not begin the DMA until
HLDA is seen to be active. This logic is disabled when REQ = 0, and enabled when REQ = 1.
5.0 INTERRUPT STRUCTURE
The 8XC152 retains all five interrupts of the 80C51BH. Six new interrupts are added in the
8XC152, to support its GSC and DMA features. They are all listed below, and the flag that gener-
ate them are shown in Figure below.
GSCRV - GSC Receive Valid
GSCRE - GSC Receive Error
GSCTV - GSC Transmit Valid
GSCTE - GSC Transmit Error
DMA0 - DMA Channel0 Done
DMA1 - DMA Channel1 Done
SMOD ARB REQ GAREN XRCLK GFIEN PDN IDL
PCON
RFNE
RDN
DMA = 0
DMA = 1
GSCRV
CRCE
AE
RCABT
OVR
GSCRE
TFNF
TDN
GSCTV
TCDT
UR
NOACK
GSCTE
DONE
(DCON0.1) DMA0
DONE
(DCON1.1)
DMA1
DMA = 0
DMA = 1