Klark Teknik DN9344E Quick Reference, 1.1. DN9340E Front Panel, BYPASS button, STORE and RECALL

Quick Reference

1.QUICK REFERENCE

1.1. DN9340E Front Panel

1 2 3 4 5

6	7	8	9	10	11	12	13
1	Access buttons	Access buttons to control each type of equalisation –
		GRAPHIC, PARAMETRIC, DYNAMIC, FILTERS. Press the HOME
		(SETUP) button (11) to return to the home page.
2	EQ active LEDs	These show if a particular type of EQ is currently affecting
		the overall frequency response.

3Main graphic display This shows the frequency response of the selected type of EQ, or the overall response on the home page.

4	Soft keys and	Select options and secondary functions as labelled on the
	secondary function	right of main graphic display. Typically, these include Select
	display	to choose a particular filter, and Menu to step round a circular
		choice of options for that type of EQ. On the home page
		these buttons access the gain, delay and naming functions.

5Alphanumeric display Displays menu pages for viewing/defining parameter values. and data entry knobs Values are adjusted via the left, centre, right control knobs.

6	BYPASS button	On the home page this bypasses the complete unit for the
		selected channel (both channels if linked). When a
		particular EQ type is selected (by the buttons above the
		bypass switch), the bypass operates on that type of EQ only.

7Channel SELECT button Press to select either channel A or B for control. If the unit is linked for stereo operation then both indicators will be lit.

8Two part touch strip Press either part briefly to select a particular filter or fader. In Graphic EQ mode, press and hold to increase the level (upper strip) or reduce it (lower strip).

9	PC port	Use with the supplied cable to install software updates or to
	STORE and RECALL	control the unit from an external computer.
10		Used to store complete unit settings to one of the 64
	buttons	memory locations (32 from unit and 32 from the PC) and
		then to recall them.

11HOME (SETUP) button

12Metering

13Power panel

Press once to return to the home page. Once on the home page, press and hold for one second to access the Setup menu. Step through the Setup menu (and exit after the last item) by repeatedly pressing this button.

Input, and Output metering incorporating multi-point clip indication.

Power switch and power ON indication.

3