Klark Teknik DN9344E specifications Controls, Connectors, Indicators DN9340E, FRONT PANEL DN9340E

Controls, Connectors, Indicators: DN9340E

3. FRONT PANEL: DN9340E

3.1. EQ Access and Displays

1 2 3 4

1	Access buttons	Access buttons to control each type of equalisation: GRAPHIC,
		PARAMETRIC, DYNAMIC, and FILTERS. Pressing one of these
		buttons selects the type of EQ to be controlled. These
		buttons do not affect the actual sound at all - they just
		activate the controls. The large display will change to show
		the display for the selected EQ type, and the TYPE bypass
		LED will indicate whether this section is bypassed or not.
		The buttons illuminate to show which type of EQ is currently
		being controlled. Press the HOME (SETUP) button to return to
		the home page, which will show the overall system
		response.
2	EQ active LEDs	These show if a particular type of EQ is currently affecting
		the overall response. Note that this is not just an indication
		of the bypass state. For example, if all the faders on the
		graphic EQ are flat, then the LED will not illuminate. If the

graphic is not bypassed, and then a fader is moved away from zero, the LED will now illuminate to indicate that the response is now being affected by the graphic. This is particularly useful on the home page where it can be quickly seen what is contributing to the overall response.

3Main graphic display This shows the frequency response of the selected type of EQ, or the overall response on the home page.

4	Soft keys display	This area of the main graphic display labels the soft key
		functions. Typically these include Select to choose a
		particular filter, and Menu to step round a circular choice of

options for that type of EQ. Additional functions include adding new filters (parametric and filter modes only) and selecting an individual fader or filter to be in or out. On the home page these buttons access the gain, delay, naming and A/B Link functions.

7