Klark Teknik DN9344E specifications Rear Panel DN9340E, Mains, Inputs a and B, Word clock Input

Controls, Connectors, Indicators: DN9340E

4. REAR PANEL: DN9340E

	1	2	3	7	5	4	6	5	4
1	Mains			Mains inlet unit is auto sensing over the range 100-240V AC.
	inlet socket
2	Ethernet			2-port Ethernet switch for remote control using Cat-5
				cabling.

3RS-232 serial interface RS-232 serial interface for Solo Tracking System operation in association with MIDAS consoles.

4	Inputs A and B	Analogue – electronically balanced XLR audio input sockets
		Pinouts: Pin 1	Screen
		Pin 2	Hot
		Pin 3	Cold

Digital – input A supports incoming 96kHz AES/EBU signals. Note that when digital input is selected, input B is inactive.

AES/EBU is 110 Ohms. Sample rate converters (SRCs) support incoming signals at sampling frequencies from 32kHz to 96kHz ± 12.5%, while allowing the unit to operate internally at 48kHz. An SRC bypass facility is available for 48kHz operation, to eliminate the propagation delay through the SRC.

Pinouts: Pin 1 Screen

Pin 2 Data +

Pin 3 Data -

5Analogue Outputs A Electronically balanced XLR audio output plugs and B

Pinouts: Pin 1 Screen

Pin 2 Hot

Pin 3 Cold

6Digital Outputs A and B Digital AES/EBU output for channels A and B. AES/EBU is 110 Ohms.

7 Word clock Input A word clock input is provided for synchronisation purposes.

11