Klark Teknik DN9340E, DN9344E specifications PC Port, Metering and Power

Controls, Connectors, Indicators: DN9340E

3.4. PC Port, Metering and Power

6

			1	2	3	4	5
1	PC port connector	8-pin mini-DIN socket for connecting to an RS-232 serial
		port on a PC or other remote control device. (Ethercon
		connectors are provided on the rear panel for remote control
		via Ethernet.)
2	Input Metering	Input metering incorporating multi-point clip indication. This
		meter indicates the input level immediately after the input
		gain trim.
3	Metering	Dynamic EQ metering. Four meters are used for
		monitoring the four dynamic EQ filters.
4	Output Metering	Output metering incorporating multi-point clip indication.
		These meters indicate the actual level leaving the unit, while
		the red clip light indicates internal clipping (monitored
		throughout the internal processing stages) irrespective of
		actual output level.
5	Power Switch	Power on.
6	Power ON indication	Power indication.

10