Klark Teknik DN9344E Using the DN9340E Memories, STORING AND RECALLING SETTINGS DN9340E

Using the DN9340E Memories

8.STORING AND RECALLING SETTINGS: DN9340E

The DN9340E includes two types of memory location, to provide maximum flexibility in a range of applications. There are 32 user memories in battery-backed-up SRAM and 32 preset memories in non-volatile FLASH memory. Recalling settings from either memory type uses the same procedure, and the user memories can be stored directly from the front panel of the unit. However, the FLASH memories can only be programmed directly from an external computer. This provides an absolute safeguard for valuable system settings, particularly in fixed installations.

To store settings:

1 Press STORE.

2Turn left encoder knob to select the destination (U01 to U32), for example, “U02”.

3Press STORE again to confirm (or HOME (SETUP) to abort). The far left character of the store name flashes.

4Use the centre encoder knob to select characters, and the left one to move left and right, to enter a suitable name for the memory. Alternatively, if the name already there indicates that you do not want to overwrite it, then HOME (SETUP) will abort the store operation as before.

5Press STORE again to confirm. This will return you to the home page.

To recall settings:

1 Press RECALL.

2Turn the left encoder to select the user (SRAM) memory required, or the centre encoder to select a preset (FLASH) memory, for example, “U02”.

3Press RECALL again to confirm. The display will show the following and then return you to the home page.

35