Klark Teknik Controls, Connectors, Indicators DN9344E, FRONT PANEL DN9344E, SETUP button

Controls, Connectors, Indicators: DN9344E

11. FRONT PANEL: DN9344E

11.1. Alphanumeric displays, SETUP, Metering and Power

5 7

1 2 3 4 1 2 3 4 6

1Alphanumeric Displays for sections 1 and 2

2Input Metering for sections 1 and 2

3 Dynamic EQ Metering for sections 1 and 2

The large red alphanumeric displays can be used to show electronic scribble-strip information, Last Memory Recalled or Set Up menu options. There are two displays, one per section.

Incorporating multi-point clip indication. Meter indicates the level immediately after the input gain trim.

Four separate meters are provided, to allow continuous monitoring of all dynamic EQ sections.

4Output Metering for Incorporating multi-point clip indication. Meter indicates the

	sections 1 and 2	actual output level from the unit, while the red clip light
		indicates internal clipping, which is monitored at every
		internal processing stage.
	SETUP button
5		Press and hold for one second to access Set Up menu, then
		press to step through the Set Up pages.
6	Power Switch	Power on.
7	Power ON indication	Power indication.

45