Operation DN9340E, Home page sub-menus | Klark Teknik DN9344E

Operation: DN9340E

6. OPERATION: DN9340E

6.1. Home Page

The home page is accessed from any of the EQ pages by pressing the HOME (SETUP) button. In the setup menu the HOME (SETUP) button is pressed repeatedly to move through the menus. After the last menu entry the display returns to the home page.

On the home page, the large display shows the overall system response. Along the top edge, on the right, is the Memory number for the currently selected User or Preset Memory settings (storing and recalling settings are described later).

The alphanumeric display shows the unit name and the name of the current working memory. On the home page, the bypass button will bypass all processing for the selected channel (A, B or both if linked for stereo in the setup menu).

6.1.1Home page sub-menus

This menu provides controls for the overall delay of the system and the input gain trim.

The delay may be adjusted in coarse increments of 2.08ms (one sample at 48kHz sample rate) using the left encoder or in fine increments of 0.02 ms with the centre encoder. It is displayed in time units by default. Alternatively, the display can be selected to show distance in either Metric or Imperial units. Details of changing the units are found in the Setup menu section on page 32.

The input gain control is adjusted by the right hand encoder between -40dB to +12dB in 0.1dB steps. Below -40dB the gain is set to “Off” and this mutes the input signal.

Press HOME (SETUP) to return to home page.

6.1.2A/B Link

This menu allows the unit to be linked for stereo operation.

Turn the right-hand encoder to select linked or non-linked (mono) mode. Note that when linking, the currently displayed channel will be copied to the other channel, so that both channels are then identical. In other words, if the “A” lamp (adjacent to SELECT button) is illuminated the settings for Channel A will be copied to Channel B. If the “B” lamp is illuminated, the settings for Channel B will be copied to Channel A.

13

Image 23

Klark Teknik DN9344E specifications Operation DN9340E, Home page sub-menus, 2 A/B Link

Contents

DN9340E/DN9344E Page Important Safety Instructions Page Declaration of Conformity Page Contents Setup Menu DN9340E Application Notes Page After Unpacking Safety WarningInstallation Considerations Page DN9340E Front Panel Quick Reference DN9344E Front Panel Host Software Versions DN9340E & DN9344E Key FeaturesKey Features Introducing the DN9340E/DN9344E Store and Recall Parameters Remote control operationSpace efficiency Interface to Midas consoles Soft keys display Controls, Connectors, Indicators DN9340EEQ Access and Displays Front Panel DN9340E Soft keys Selected channel both channels if linked. When aBypass, Channel Select, Soft Keys and Alphanumeric Display Touch Strip, Store and Recall, Home Setup and Data Entry PC Port, Metering and Power Word clock Input Rear Panel DN9340EMains Inputs a and B Signal Flow DN9340E Signal Flow DN9340E Home page sub-menus Operation DN9340EOperation DN9340E Home Touchstrip Operation on the Home Soft Key Functions Graphic Equalisation EQ Flat Automatic features Grouping Touchstrip operation with Graphic equalisation Parametric Equalisation EQ remove Touchstrip operation with Parametric equalisation Hi Threshold / Level Dynamic EqualisationLo Threshold / Level Time constants Touchstrip operation with Dynamic equalisation Filter Type Left Encoder Centre Encoder Right Encoder FiltersCreate Filter function Filter remove Filter settingsTouchstrip operation with Filters Metering Clear Down Sequence General Setup Menu DN9340ESetup Menu DN9340E To access the Set Up menu pages To select a slave remote communications channel Remote control via a PCTo switch remote communications off Comms channel To remove the unit from the network Using a DN9340E for master controlTo select a master remote communications channel To select a slave communications channel To remove the Panel Lock Front Panel lockTo set a Panel Lock To change the input source Analogue/Digital Input Select To select the output clock source Presets lockTo set a Presets lock Digital Output Clock Select To enter a name LCD contrast adjustmentDelay options Naming Pages 7 Ethernet IP Address Power-up LogoEthernet Settings Pages 11 To check and edit the Subnet Mask Ethernet Subnet Mask Setup To recall settings Using the DN9340E MemoriesTo store settings Data model Remote ControlConnections Addresses On a DN9344E Setting the master unit on-lineGetting started On a DN9340E System naming To set up the namesOperation Solo Tracking operation To set up the assignmentCopy channel function Helix DN9340E/DN9344E unit interconnections Overview Connecting the Helix DN9340/DN9344E units in a daisy chain Ethernet connection standard Ethernet connection wireless optionEthernet Connection Configuring the DN9344E for Network Communication Configuring the DN9340E for Network Communication Serial connection details Connection and Configuration ProcedureSerial Connection Option Power Switch Power on Power on indication Power indication Controls, Connectors, Indicators DN9344EAlphanumeric displays, SETUP, Metering and Power Press to step through the Set Up pages Indicators Indicators, Up and Down Buttons, PC Port and Scribble Strips Interface Rear Panel DN9344EMains inlet socket 1B, 2A and 2B Signal Flow DN9344E Signal Flow DN9344E Remote Comms channels Operation DN9344EOperation DN9344E To select a remote communications channel To disable remote communications and relay operation To enable the Contact Closure Relay mode Analogue/Digital Input Select Pages 3 PasswordTo set a password To change the settings for Inputs 1A and 1B Digital Output Clock Select Pages 5 To change the settings for Output To change the Subnet Mask Ethernet SettingsSubnet Mask To change the IP address Dynamic EQ Application Notes Application Notes Application Notes What do we mean by all these Q types? Constant Q Proportional Q Symmetrical Q What is AES/EBU? 17.1. DN9340E Technical Specification DN9340E Power Requirements 17.2. DN9344E Technical Specification DN9344E Relay Socket Pin D-type rear Power Pin IEC Replacement Service InformationBattery