Kodak 2.2 manual Faxing, Before you begin faxing, Connecting the printer for faxing

9

Faxing

Your printer can send and receive faxes in either black and white or colour.

Before you begin faxing

Before you can send or receive faxes, you must connect your printer and set up the fax options.

Connecting the printer for faxing

Selecting the country/region

For the fax to work properly, the country or region selected on the printer must match your location. This setting determines how your faxes are sent and received.

1.Press .

2.Press to select Printer Settings, then press OK.

3.Press to select Country/Region, then press OK.

4.Press to select your country or region, then press OK.

Determining your telephone system type

The instructions for setting up your printer for faxing differ depending on the type of telephone service you have. Determine the type of telephone service you have, and connect your printer accordingly.

:Use the phone cord that was provided with the printer. If you use any other phone cord, you may not be able to send or receive faxes successfully.

Standard telephone service — telephone service that uses dedicated telephone wiring to transmit only phone signals

Cable telephone service — telephone service that is delivered by a cable television service

Digital Subscriber Line (DSL) — telephone service that uses the wires of a local telephone network to transmit digital data over cables

Internet telephone service (Voice-Over-Internet Protocol or VOIP) — telephone service delivered by an Internet provider

Connecting to a Standard or Cable telephone service

If you have Standard or Cable telephone service, connect one end of the phone cord that came with the printer to the LINE IN port on the back of the printer and the other end to the wall phone jack.

56 www.kodak.com/go/aiosupport