Kodak 7520 manual Vertical start print position, Changing the vertical start print position

Vertical start print position

The vertical start print position is defined at installation and determines how far the printed information will appear from the leading edge of the document.

Leading edge (fed into transport first)

D
P	Vertical start print position
1
T
E
S
T

Trailing edge

NOTE: Printing automatically stops ¼-inch (6.3 mm) from the trailing edge of the document, even if the information has not been completely printed.

Changing the vertical start print position

∙Use function code F46 to change the vertical start print position of the front Document Printer.

∙Use function code F47 to change the vertical start print position of the rear Document Printer.

To change the vertical start print position:

1.Enter function code F46 (front Document Printer) or F47 (rear Document Printer).

2.Press Enter.

3.Enter a value between 0.125 to 30 inches (3 to 760 mm) for the desired vertical start print position. The value should not exceed the document length.

4.Press Enter.

A-61140 January 2000 8-29