Kodak 7520 manual Function Code Name, Description, Enter

Code	Function Code Name	Description
F70	Length Monitor On/Off	Allows you to turn the length monitor on or off. The length
		monitor checks the length of the documents scanned
		against the predefined minimum/maximum allowable
		lengths. Messages and/or confirmation tones alert you if
		the document is shorter or longer than the predefined
		length.
F71	Omit Length Monitor on the	Allows you to omit length checking on the next document
	Next Document Only	scanned. Length monitoring will resume on subsequent
		documents. Enter 1 to turn on or 0 to turn off, then press
		Enter.
F72	Skew Monitor	Allows you to turn skew detection on or off which monitors
		the amount of skew using predefined skew angle(s).
F73	Latched Flag On/Off	Allows you to set a flag in the image headers which alerts
		the host system that this document, and those which
		follow, are of special interest. The flag will remain activated
		for every document until it is turned off. Enter 1 to turn on
		or 0 to turn off, then press Enter.
F74	Momentary Flag	Allows you to set a flag in the image header which alerts
		the host system that this document is of special interest.
		This flag is set only for that one document. Enter 1 to turn
		the momentary scanning flag on, then press Enter.
F75	Footswitch Confirmation	Allows you to turn the confirmation tone on or off which
	Tone	informs you when the Footswitch is pressed and/or
		released. Enter 1 to turn on or 0 to turn off, then press
		Enter.

A-61140 January 2000 4-7