Kodak 7520 manual Replace the imaging guide with the bar code attached to it

11.Replace the imaging guide with the bar code attached to it.

NOTE: Refer to Chapter 5, Maintenance for procedures on removing the imaging guides.

12.Swing the vertical transport plate closed and rotate the release handle 180° counterclockwise (so the red arrow aligns with the red rectangle) to latch the transport plate.

Red arrow

Red rectangle

13.Close the side access door.

14.Release and lower the horizontal transport plate back into its original position.

15.Lower the release bar and latch the front scan module into its original position.

16.Close the lower access door.

17.Close the upper access door.

When you have finished attaching the bar code to the imaging guide, return to the status display and continue with the following steps:

Put BC Doc Close

Door, Press Enter

8-12 A-61140 January 2000