Kodak 7520 manual Enter, Function Code Name, Description

Code	Function Code Name	Description
F46	Front Document Printer	Allows you to specify how far from the leading edge of the
	Vertical Start Print Position	document printed information will appear. Use the numeric
		keys to input values between 0.125 and 20 inches (3 to
		508 mm) in increments of 0.125 (3mm). The value will
		correspond to the selected measurement system and
		should not exceed the document length. The horizontal
		start print position is changed manually.
F47	Rear Document Printer	Allows you to specify how far from the leading edge of the
	Vertical Start Print Position	document printed information will appear. Use the numeric
		keys to input values between 0.125 and 20 inches (3 to
		508 mm) in increments of 0.125 (3mm). The value will
		correspond to the selected measurement system and
		should not exceed the document length. The horizontal
		start print position is changed manually.
F48	Purge Print Heads	Allows you to purge and clean slightly hardened ink from
		the print head of the document printers. Feed a single
		blank document after the feed clutch engages.
F50	Patch Reader On/Off	Allows you to turn the Patch Reader on or off. Enter 1 to
		turn on or 0 to turn off, then press Enter.
F53	Patch Reader Confirmation	Allows you to turn the confirmation tone on or off which
	Tone On/Off	informs you when the Patch Reader has successfully read
		a patch document. Enter 1 to turn on or 0 to turn off, then
		press Enter.
F54	Omit Patch Reading on	Allows you to omit patch reading on the next document
	Next Document On/Off	scanned. Normal patch reading resumes with subsequent
		documents. Enter 1 to turn on or 0 to turn off, then press
		Enter.
F55	Patch Test	Allows you to test for patch position and patch quality. The
		test result will indicate: T-Patch, 2-Patch, 3-Patch or
		Patch Not Read.
F60	Bar Code Reader On/Off	Allows you to turn bar code reading on or off. Enter 1 to
		turn on or 0 to turn off and then press Enter.
F63	Bar Code Reader	Allows you to turn the confirmation tone on or off which
	Confirmation Tone	informs you when the Bar Code Reader has successfully
		read a bar code document. Enter 1 to turn on or 0 to turn
		off and then press Enter.
F64	Omit Bar Code Reading on	Allows you to omit bar code reading on the next document
	the Next Document Only	scanned. Bar Code Reading will resume on subsequent
		documents. Enter 1 to turn on or 0 to turn off, then press
		Enter.
F65	Bar Code Test	Allows you to perform a test to verify bar code position, bar
		code quality and bar code read rate.

4-6 A-61140 January 2000