Kodak 7520 manual Replacing the feeder module and separator roller

Replacing the feeder module and separator roller

To replace the feeder module and separator roller, follow the steps below:

Replacing the feeder module:

1.Open the front cover.

2.Push the roller cover release lever toward the back of the machine.

3.Grasp and rotate the roller cover toward the back of the machine, exposing the feeder module and separator roller.

Roller cover release lever

Roller cover

Feeder module

4.Remove the feeder module by pushing it to the right and lifting it out of its position.

5.Reinsert a new feeder module, by aligning the pins and fitting it into position.

5-20 A-61140 January 1999