Kodak 7520 manual Document and surrounding text, Front image guide surface facing the rear of the

9.Prepare the bar code to be evaluated by cutting around the bar code so only the vertical black and white bars remain. Cut away all text and surrounding marks or illustrations.

NOTE: The bar code used must be the same type indicated in the first line of the status display of the first page.

Document and surrounding text

10.Use transparent adhesive tape to adhere the bar code to the appropriate imaging guide in the proper direction. If the Bar Code Reader is set to read data through the front scan module, adhere the bar code to the front imaging guide and ensure that the bar code is facing the front scan module. If the Bar Code Reader is set to read data through the rear scan module, adhere the bar code to the rear imaging guide and ensure that the bar code is facing the rear scan module.

Front image guide (surface facing the rear of the

Bar code (should face the front of the scanner)

Transparent adhesive tape

A-61140 January 2000 8-11