Kodak 7520 manual Clearing documents

Clearing documents	Follow the steps below to clear the document path:
	1.	Check each transport area in turn (Areas A through D) for
		documents lodged in the document path. You only have to remove
		the jammed document(s). The Jog feature places the rest of the
		documents in the exit hopper. Make certain all operator-accessible
		areas are firmly closed and the transport plates are locked into
		place.
	2.	Press and hold down the Jog key to clear any remaining
		documents.
	3.	Collect the documents located in the transport system. Put them
		back into their original order, if necessary.
	4.	Reset the image address, level, etc., if necessary.
	5.	Rescan the documents. If an error code appears in the status
		display, check each transport area again to make certain all
		documents have been cleared.

NOTE: Green labels on handles designate operator-accessible areas.

7-4 A-61140 January 2000