Kodak 7520 Feeding documents manually

Feeding documents manually

7.As you scan documents, set the image level, as required, and periodically remove documents from the exit hopper.

NOTE: When the image buffer is full, the feeder will turn off and the image buffer status light will turn red. There may be a momentary pause in scanning while images are being transferred to the host computer. Scanning will resume and the status indicator will change to green when the image buffer is clear.

8.Press Stop to disable the transport system after the last document has been scanned, or press End to alert the host computer the batch or job has ended and to disable the transport system after the last document has been scanned.

To manually feed documents, follow the steps below:

1.Select the correct scanning operating values.

2.Place the feed shelf in the up or down position (semi-automatic feeder only), whichever is most convenient.

3.Insert the documents one at a time.

NOTE: Be sure the documents are center-fed so each document covers the 2 ½-inch required width as indicated by the label on the feed tray.

A-61140 January 2000 3-5