Kodak 7520 manual Feeding thick documents

Feeding thick documents

The gap release lever is used to feed thick documents such as card stock or cover stock. The lever is located on the front panel of the scanner next to the gap adjustment knob.

	(Graphic depicts movement
	of separator rollers when
		lever is used)
(Graphic depicts gap		Gap
adjustment)		release
		lever

To feed thick documents using the gap release lever:

1.Press down and hold the gap release lever; this opens the gap between the feed and separator rollers allowing thick documents to pass between them. You will be able to see the gap open as the lever is pushed down.

2.Insert the thick document past the rollers until it is taken into the transport system.

NOTE: If more than one thick document is to be scanned, feed them into the transport one at a time.

3.After the thick document(s) have been scanned, release the gap release lever; it will return to its original position. The feed and separator rollers will return to their previously adjusted positions.

3-6 A-61144 January 2000