Kodak 7520 manual Using the Display option, Bar code was not read, Message

Using the Display option

The Display option allows you to display the decoded value of an individual bar code as it is fed into the transport.

To verify that a bar code is decoded properly:

1. Select 2: DP.

BC Type =

1: EV 2: DP 3: Rr

2.Feed a bar code document into the transport. One of the following messages will be displayed:

Message 1

BC Type =

?

Bar code was not read.

If the display indicates the bar code was not read, it could be for one of the following reasons:

∙The type of bar code read was not the type indicated in the status display.

Action: Verify the type of bar code read.

∙The bar code was fed in the wrong direction or upside down. Action: Verify that the bar code was fed correctly.

∙The bar code quality is poor.

Action: Perform the required maintenance.

Message 2

BC Type =

*XXXXXXXXXXXXX

This display gives the decoded value of the bar code read (including the *, representing the start character) is equal to or less than 15.

A-61140 January 2000 8-17