Kodak 7520 manual Clearing, Document path

Area A

Trouble	Probable Cause	Remedy
Some images are not	If you have the Image Manager	To avoid loss of data, make sure
deskewed	Accessory installed, and you	documents are not severely
	encounter images that are not	skewed with the left corner in the
	deskewed, it may be that the	middle of the scanning width.
	upper left corner could be close
	enough to the center that when
	the document is deskewed, part
	of the document area is cut off.
Repeated low lamp error	Lamps may not be properly	Make sure the lamps are securely
messages.	installed.	seated in the lamp socket holders.

Clearing the	If a document becomes lodged in the scanner transport system, the
document path	system stops running and a message appears in the status display.
	A document can become lodged in the transport system when:
	∙ Documents are not fed straight (skewed).
	∙ Documents are torn, badly folded, or wrinkled.
	∙ Staples and paper clips were not removed from documents.
	∙ Imaging guides are not seated properly or are not installed.
	∙ Transport system plates are not firmly closed.
	The document path can be cleared easily because:
	∙ No tools are needed.
	∙ Access doors let you quickly locate and clear documents.
The document path	There are four areas in the transport system where documents may
	become lodged and need to be removed:

Area D

Area C

Area B

A Feeder area

BHorizontal transport plate, lower belt module and lower turn areas

CVertical transport plate and imaging guide areas

DDocument exit and upper turn roller areas

A-61140 January 2000 7-3