Kodak 7520 manual Close the side access door

7.Swing the vertical transport plate closed and rotate the release handle 180° counterclockwise (so the red arrow aligns with the red rectangle) to latch the plate.

Red arrow

Red rectangle

8.Close the side access door.

9.Release and lower the horizontal transport plate back into its original position.

10.Lower the release bar and latch the front scan module into its original position.

11.Close the lower access door.

12.Close the upper access door.

13.Locate and grasp the end of the front imaging guide. Carefully slide the imaging guide out of its track.

14.Locate and grasp the end of the rear imaging guide. Carefully slide the imaging guide out of its track.

15.Grasp and hold the new rear imaging guide by the green handle and carefully slide it into place. Make sure the grooves fully engage the track.

16.Grasp and hold the new front imaging guide by the green handle and carefully slide it into place. Make sure the grooves fully engage the track.

NOTE: The imaging guides are not interchangeable. They can only be inserted one way.

17.Close the right-side access door.

A-61140 January 2000 5-19