Korg V2 manual Menu Command, 7B Sel Dir/WAVE Audio Track, Auditioning the contents of a Wave file

0–7: Page Menu Command

In the 0–7: Sampling page, the page menu commands “Sel Dir/WAVE (Audio Track),” “Auto Sampling/HD Audio Setup,” “Bounce All Tracks To Song,” and “Copy From Pro- gram” (☞p.43) have been added.

0–7B

0–7C

0–7D

0–7B: Sel Dir/WAVE (Audio Track)

This command lets you select a save-destination (directory) for the audio track WAVE file, or select the WAVE file that will be used by the audio track.

1.Specifying the save-destination of the WAVE file created when you record or edit an audio track

When specifying a WAVE file save-destination, We rec- ommend that you specify a location that is inside (one level down from) the directory in which the song file is saved. If you create a directory when saving the song file and keep all the files in that directory, it will be eas- ier to back up your data to removable media.

1Choose “Sel Dir/WAVE (Audio Track)” to open the dia- log box.

“Drive Select”

2Use “Drive Select” to select the save-destination drive.

3Use the Open button and Up button to move between directories.

4Select the directory where you wish to save the WAVE file and press the Done button to complete the selection. The directory that was selected when you pressed the Done button will be specified as the save-destination.

2. Auditioning the contents of a WAVE file

1Choose “Sel Dir/WAVE (Audio Track)” to open the dia- log box.

“Drive Select”

2Use “Drive Select,” the Open button, and the Up button to select the drive and directory, and select the WAVE file (44.1 kHz or 48 kHz) that you want to play back.

3Press the SAMPLING [START/STOP] key. The selected WAVE file will play back.

4Press the SAMPLING [START/STOP] key once again to stop playback.

If the WAVE file is mono, the same signal will be output to L and R.

While the WAVE file is playing back, pressing the key- board or inputting note data via MIDI will not produce sound. Also, the arpeggiator will stop.

3.Assigning a WAVE file from the internal hard drive to the audio track of a song

Here’s how to take a WAVE file saved to the internal hard drive (one that you ripped from CD or created by resam- pling in Program mode etc. ) and assign it to the audio track of the current song.

1Choose “Sel Dir/WAVE (Audio Track)” to open the dia- log box.

“Drive Select”

“WAVE File” indicates the name of the WAVE file that is assigned to the audio track of the current song. If this shows No Assign, the audio track is empty.

If a WAVE file is assigned to the audio track, press the Clear button to cancel the assignment; the “WAVE File” field will now appear as No Assign.

2Use “Drive Select,” the Open button, and the Up button to select the drive and directory.

3Select the WAVE file that you want to use as the audio track.

Press the SAMPLING [START/STOP] key to play back and audition the selected file.

16