Copy From Program
“Copy From Program” has been added to the page menu commands of pages such as Combination P0 (0–1 ☞PG p.33).
0–1C
0–1C: Copy From Program
This command copies the settings of the specified program to a timbre of the currently selected combination. The effect settings and arpeggiator settings of the specified program can be copied as well, replacing the Combi’s effect and arpeggiator settings.
1Select “Copy From Program” to open the dialog box.
2Use “Program” to select the copy-source program.
3If you check “with Effects,” the insert effect, master effect, and master EQ settings will also be copied. The “Control Channel” of each effect will be set to the MIDI channel of the copy-destination timbre.
About the BUS Select (8–1b/8–2a☞PG p.46) setting
•Regardless of the “with Effects” setting, “BUS Select” will be set to DKit if the copy-source program’s “Use DKit Setting” is checked. In conjunction with this, the “DrumKit IFX Patch” setting will be reset to the default setting.
•If “with Effects” is checked, the “Bus Select” setting of the copy-source program will be copied. If the copy-destination timbre “BUS Select” was set to IFX1–IFX5, it will automatically be set to L/R.
•If “with Effects” is unchecked, then the copy-source“BUS Select” setting will be ignored. or if the “BUS Select” of the copy-source program and copy- destination timbre is set to IFX1–IFX5, it will automatically be set to L/R.
4If you check “with Arpeggiator,” the arpeggiator set- tings of the copy-source program will be copied to the arpeggiator you specify in step 6. In conjunction with this, “Arpeggiator Run” will be set to the “checked” state for the arpeggiator you specify in step 6, and the copy-destination timbre’s “Arpeggiator Assign” will be set to the arpeggiator you specify in step 6.
5Use “To” to specify the copy-destination timbre.
The parameters specific to that timbre will be initialized. The copy-source program will be specified for “Program Select” (0–1c ☞PG p.51).
•The “MIDI Channel” (2–1b☞PG p.38) setting will not change if “with Arpeggiator” is checked. If “with Arpeggiator” is unchecked, “MIDI Channel” will be automatically set to Gch.
•The “Bank Select (When Status=EX2”) (2–1b ☞PG p.38) setting will not change.
•The “Status” (2–1b ☞PG p.38) setting will automatically be set to INT.
•If the copy-source is a program from the INT-F bank, the “Voice Allocation Reserve” (☞EM p.47) of the copy-destination track will be set to 6, and the “Voice Allocation Reserve” setting of the other timbres will be set to 0. Also, the “MOSS BUS Select Reference” (☞EM p.47) setting will be automatically set to the copy-destination timbre.
•The 1–4: Controller (☞PG p.12) settings of the copy- source program will be copied.
6Use “Arpeggiator” to specify the copy-destination arpeg- giator.
7Press the OK button to execute the copy. If you decide not to execute, press the Cancel button.
Add the contents of “0–1C: Copy From Program” to the explanation of “Parameter Guide” Combination mode 0–1: Prog. Select Page Menu Command (☞PG p.35).
