Korg V2 manual Source Audio*2 Input1 Level 127 Pan L000 BUS Select

Automatically-set parameters and their values

	Parameter		1. Initialize	2. Resample Combination Play	3. REC Audio Input
Input (Input Source)			(Analog, S/P DIF, mLAN)*1	(Source Audio)*2	(Source Audio)*2
Input1		Level	127	127	127
		Pan	L000	L000	L000
		BUS Select	Off	Off	1/2
		Send1	000	000	000
		Send2	000	000	000
Input2		Level	127	127	127
		Pan	R127	R127	R127
		BUS Select	Off	Off	1/2
		Send1	000	000	000
		Send2	000	000	000
Sampling Setup		Source BUS	L/R	L/R	Indiv.1/2
		Trigger	Note On	Note On	Sampling START SW
		Metronome Precount	Off	-	-
		Save to	RAM	(Save to)	(Save to)
		Mode	Stereo	Stereo	(Source Audio)*3
		Sample Time: RAM	Maximum	-	-
		Sample Time: DISK	4min 59.999sec	-	-
		Recording Level [dB]	–12.0	–12.0	+0.0
Select Bank		Auto +12dB On	On	On	Off
(Page Menu Command)
		Convert to Program	Off	(Convert to Program)	(Convert to Program)
		Program	-	(Program)	(Program)
		MS	-	Newly created *4	Newly created *4
		Orig.Key	-	C2*4	C2*4

- : Not set automatically

Values enclosed in parentheses ( ) are automatically set according to the settings you make in the dialog box.

*1: Settings for analog, S/P DIF, and mLAN (“Input 1” and “Input 2”) are made automatically.

*2: The input source setting (“Input 1” and “Input 2”) you specified for “Source Audio” in the dialog box will be set automati- cally.

*3: If “Source Audio” is Mono-1this will be L-Mono, if Mono-2this will be R-Mono, and if Stereo this will be Stereo.

*4: When “Save to: RAM,” and “Convert to Program” is checked.

Disk

Global

Other functionality Program Combination Sampling

65