Added messages
The following messages have been added.
Audio Track size over limit
Meaning: Recording or editing an audio track in Sequencer mode has caused the audio track to exceed its maximum length of 80 minutes.
Action: You cannot record or edit an audio track so that it would exceed 80 minutes.
Can’t record Audio Track
Change MIDI Clock to Internal
Meaning: You attempted to record an audio track when “MIDI Clock” (☞PG p.143) was set to other than Internal. To play back or record an audio track, the “MIDI Clock” must be set to Internal.
Action: In Global mode, set “MIDI Clock” (☞PG p.143) to Internal.
Exceeded 8 Programs
Meaning: During execution of Advanced Conversion Load, the maximum number of eight programs was exceeded. Depending on the structure of the AKAI Program, it may be
Action: After loading one AKAI Program, edit it on the
TRITON.
Action: Instead of using Advanced Conversion Load, load the data as multisamples or samples, and then edit it on the TRITON.
File/path not found
Meaning: When you attempted to play or record an audio track, the WAVE file assigned to the audio track of the song did not exist in the
Action: Use the Sequencer P0: Play/REC, Sampling/HD Audio page menu command “Sel Dir/WAVE (Audio Track)” to reassign the appropriate WAVE file.
Meaning: When you attempted to execute the Disk mode page menu command “Collect Audio Track file,” the WAVE file assigned to the audio track of the song file did not exist in the
Action: Use the Sequencer P0: Play/REC, Sampling/HD Audio page menu command “Sel Dir/WAVE (Audio Track)” to reassign the appropriate WAVE file, and then use the Disk
Source file is not 44100 Hz or 48000 Hz | Can’t put |
Meaning: When executing the Sequencer mode P5: Track Edit page menu command “Put WAVE,” you had selected a WAVE file that was other than 44.1 kHz or 48 kHz.
Action: WAVE files other than 44.1 kHz or 48 kHz cannot be placed in an audio track.
Source file is not 44100 Hz or 48000 Hz | Can’t set |
Meaning: When executing the Sequencer mode P0: Play/ REC, Sampling/HD Audio page menu command “Sel Dir/WAVE (Audio Track),” you had selected a WAVE file that was other than 44.1 kHz or 48 kHz.
Action: WAVE files other than 44.1 kHz or 48 kHz cannot be assigned to an audio track.
There is no WAVE file to copy
Meaning: When executing the page menu command “Col- lect Audio Track file,” the WAVE file to be copied for that song file did not exist. (All WAVE files used by the audio track were found in the speci- fied directory.)
Action: Verify that a WAVE file has been assigned to the audio track of the song, and once again use the Sequencer mode P0: Play/REC, Sampling/HD Audio page menu command “Sel Dir/WAV (Audio Track)” to reassign the WAVE file to the audio track.
Do not move the WAVE file used by the audio track to a different directory. The audio track cannot be played if you do so. If you do move the WAVE file, you must once again use the Sequencer mode P0: Play/REC, Sampling/HD Audio page menu command “Sel Dir/ WAVE (Audio Track)” to reassign the WAVE file to the audio track.
This file does not have an Audio Tracks
Meaning: An audio track does not exist for the song file on which you attempted to execute the page menu command “Collect Audio Track.”
Action: Make sure that the song file was created by the TRITON STUDIO version 2.0.
WAVE file size over limit
Meaning: When using Disk mode Edit WAVE to edit, you exceeded the maximum allowable length of 230,400,000 samples (80 minutes at a sampling rate of 48 kHz) for a WAVE file.
Action: You cannot use Edit WAVE to edit a WAVE file that exceeds 230,400,000 samples (80 minutes at a sampling rate of 48 kHz).
Add these messages to Parameter Guide – 9. Appendices – Various messages (☞PG p.272).
Disk
Global
Other functionality Program Combination Sampling
71
