Auto Sampling/HD Audio Setup

The page menu command “Auto Sampling/HD Audio Setup” has been added to the Sequencer P0: Play/REC, Sampling/HD Audio page. (p.17)

This convenient function automatically sets the relevant parameters to the ideal settings for various operations such as Sequencer mode sampling (e.g., In-Track Sampling), recording using the “HD Audio Track,” two-channel mix- down to create an audio CD, or bouncing tracks. (For the automatically-set parameters and their values, refer to p.32)

When you execute this operation, the relevant parame- ters will be set automatically. You cannot use the [COM- PARE] key to revert to the prior settings.

The settings are automatically made for the most typi- cal applications. After executing the auto setup opera- tion, you can further adjust any of the parameters as described in the paragraphs for each item.

1. Initialize

This initializes the parameters related to sampling or audio track recording.

1Select “Auto Sampling/HD Audio Setup” to open the dialog box.

2Use the radio buttons to select Initialize.

3To execute “Auto Sampling/HD Audio Setup,” press the OK button. If you decide to cancel, press the Cancel but- ton. (For the automatically-set parameters and their val- ues, refer to p.32)

2. Resample SEQ Play

This automatically makes the necessary settings for resam- pling your keyboard performance in Sequencer mode.

Setup

1Select “Auto Sampling/HD Audio Setup” to open the dialog box.

2Use the radio buttons to select Resample SEQ Play.

3Use “Save to” to select the location to which the resam- pled data will be written. (PG p.5 “Save to”)

RAM: The resampled data will be written into sample memory (RAM). If the “Convert to Program” option in step 4 is checked, a new multisample will automatically be created after resampling.

DISK: The resampled data will be saved as a WAVE file on the internal hard drive or a hard drive etc. connected to the SCSI connector.

4If you set “Save to” to RAM, checking “Convert to Pro- gram” will convert the resampled data into a program of the number you specify in “Program.” After resampling, you can switch to Program mode and try out the data immediately.

5Use “Program” to specify the conversion-destination program.

6Press the OK button to execute “Auto Sampling/HD Audio Setup.” If you decide to cancel, press the Cancel button. (For the automatically-set parameters and their values, refer to p.32)

If “Save to” is set to RAM and you want to change the RAM bank, use the page menu command “Select Bank

&Smpl No.” (Sequencer 0–7A PG p.56) to specify the sampling-destination sample memory (RAM).

If “Save to” is set to DISK, use the Program mode page menu command “Select Directory” (Program 0–3D PG p.7) to specify the save-destination for the WAVE file that is created by resampling.

Resample

7Press SAMPLING [REC] and then SAMPLING [START/STOP].

8Start the sequencer playback or play live on the key- board. You can play along with the sequencer during res- ampling. If you are only playing live, and not using the sequencer, sampling will begin with the first note-on. (PG p.4)

9When you are finished performing, press the SAM- PLING [START/STOP] key.

If “Save to” is set to RAM (Convert to Program) and you continue resampling without changing the settings, the successive samples will automatically be assigned to C#2, D2, ...

Listen to the resampled data

If “Save to” was set to RAM (Convert to Program), switch to Program mode, select the program that was created, and play the C2 key to hear the program.

If “Save to” was set to DISK, go to Program mode and use the page menu command “Select Directory” to hear the WAVE file that was created. (Program 0–3D PG p.7)

If you want to simultaneously resample the song play- back and your keyboard performance, change “Trig- ger” (0–7b PG p.56) to Sequencer START SW so that resampling will begin the moment the sequencer starts.

If you also want to sample an external audio signal from AUDIO INPUT etc. at the same time, go to the Sequencer P0: Play/REC, Sampling/HD Audio page and set Input 1, 2 “BUS (IFX/Indiv.) Select” to L/R. (BG p.46)

28

Page 33
Image 33
Korg V2 manual Auto Sampling/HD Audio Setup, Initialize, Resample SEQ Play, Listen to the resampled data