Menu item

Portrait Height 3–14.17 inches 76–360 mm

Feed Direction

Short Edge

Long Edge

Description

Sets the portrait height

Notes:

If the height exceeds the maximum, then the printer uses the maximum height allowed.

14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.

356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.

Specifies the feed direction

Notes:

Short Edge is the factory default setting.

Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray.

Reports menu

Reports menu

Menu item

Menu Settings Page

Device Statistics

Network Setup Page

Network <x> Setup Page

Description

Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information

Note: The page prints when this item is selected.

Prints a report containing printer statistics such as supply information and details about printed pages

Note: The page prints when this item is selected.

Prints a report containing information about the network printer settings, such as the TCP/IP address information

Notes:

This menu item appears only for network printers or printers connected to print servers.

The page prints when this item is selected.

Prints a report containing information about the network printer settings, such as the TCP/IP address information

Notes:

This selection is available when more than one network option is installed.

This menu item appears only for network printers or printers connected to print servers.

The page prints when this item is selected.

Understanding printer menus

102

Page 102
Image 102
Lexmark C734, 410, 5026, 4977, 480, 4976, 280, C736 Series, dn3, dw2, dw1, gn2, gn1, gw1, gw2, n01, n03 Reports menu, 102, Feed Direction