Utilities menu

Menu item

Remove Held Jobs

Confidential

Held

Not Restored

All

Format Flash

Yes

No

Delete Downloads on Disk Delete Now

Do Not Delete

Job Acct Stat

Print

Clear

Hex Trace

Activate

Coverage Estimator

Off

On

Description

Removes confidential and held jobs from the printer hard disk

Notes:

Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, jobs on flash drives, and other types of held jobs are not affected.

Selecting Not Restored removes all Print and Hold jobs that were not restored from the disk.

Formats the flash memory. Flash memory refers to the memory added by installing a flash memory option card in the printer.

Warning—Potential Damage: Do not turn off the printer while the flash memory is formatting.

Notes:

A flash memory option card must be installed in the printer and operating properly for this menu item to be available. The flash memory option card must not be Read/Write or Write protected.

Selecting Yes deletes all data stored in flash memory.

No cancels the format request.

Removes downloads from the printer hard disk, including all held Jobs, buffered jobs, and parked jobs. Job accounting information is not affected.

Note: Delete Now is the default setting.

Prints a list of all stored job statistics or deletes the information from the printer hard disk

Notes:

A printer hard disk must be installed in the printer and operating properly for this menu item to be available.

Selecting Print prints a list of statistics.

Clear deletes all job statistics stored on the printer hard disk.

The Clear selection will not appear if Job Accounting is set to MarkTrackTM using NPA.

Assists in isolating the source of a print job problem

Notes:

When Activate is selected, all data sent to the printer is printed in hexadecimal and character representation and control codes are not executed.

To exit or deactivate Hex Trace, turn the printer off or reset the printer.

Provides an estimate of the percentage coverage of black on a page. The estimate is printed on a separate page at the end of each print job.

Note: Off is the factory default setting.

Understanding printer menus

132

Page 132
Image 132
Lexmark 210, 410, 5026, 4977, 480, 4976, 280, C736 Series, C734, dn3, dw2, dw1, gn2, gn1, gw1, gw2, n01, n03, n02 manual Utilities menu, 132