Menu item

USB Buffer Disabled Auto

3k to <maximum size allowed>

Job Buffering

On

Off

Auto

Mac Binary PS

On

Off

Auto

ENA Address

ENA Netmask

ENA Gateway

Description

Sets the size of the USB input buffer

Notes:

Auto is the factory default setting.

The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.

The USB buffer size value can be changed in 1k increments.

The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether the Resource Save setting is On or Off.

To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.

Changing this setting from the control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Temporarily stores jobs on the printer hard disk before printing

Notes:

Off is the factory default setting.

The On setting buffers jobs on the printer hard disk.

The Auto setting buffers print jobs only if the printer is busy processing data from another input port.

Changing this setting from the control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the printer to process Macintosh binary PostScript print jobs

Notes:

Auto is the factory default setting.

The Off setting filters print jobs using the standard protocol.

The On setting processes raw binary PostScript print jobs.

Sets the network address information for an external print server that is attached to the printer using a USB cable

Note: This menu item is available only if the printer is attached to an external print server through the USB port.

Sets the netmask information for an external print server that is attached to the printer using a USB cable

Note: This menu item is available only if the printer is attached to an external print server through the USB port.

Sets the gateway information for an external print server that is attached to the printer using a USB cable

Note: This menu item is available only if the printer is attached to an external print server through the USB port.

Understanding printer menus

111

Page 111
Image 111
Lexmark n03, 410, 5026, 4977, 480, 4976, 280, C736 Series, C734, dn3, dw2, dw1, gn2, gn1, gw1 111, ENA Address ENA Netmask ENA Gateway