Lexmark gn1, 410, 5026, 4977, 480, 4976, 280, C736 Series, C734, dn3, dw2, dw1, gn2, gw1, gw2 IPv6 menu, 107

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª TCP/IP

Menu item	Description
Activate	Activates TCP/IP
On	Note: On is the factory default setting.
Off
View Hostname	Lets you view the current TCP/IP hostname
	Note: This can be changed only from the Embedded Web Server.
IP Address	Lets you view or change the current TCP/IP Address
	Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
	settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
	support BOOTP and RARP.
Netmask	Lets you view or change the current TCP/IP Netmask
Gateway	Lets you view or change the current TCP/IP Gateway
Enable DHCP	Specifies the DHCP address and parameter assignment setting
On
Off
Enable RARP	Specifies the RARP address assignment setting
On	Note: On is the factory default setting.
Off
Enable BOOTP	Specifies the BOOTP address assignment setting
On	Note: On is the factory default setting.
Off
AutoIP	Specifies the Zero Configuration Networking setting
Yes	Note: Yes is the factory default setting.
No
Enable FTP/TFTP	Enables the built-in FTP server, which allows you to send files to the printer using the
Yes	File Transfer Protocol.
No	Note: Yes is the factory default setting.
Enable HTTP Server	Enables the built-in web server (Embedded Web Server). When enabled, the printer
Yes	can be monitored and managed remotely using a web browser.
No	Note: Yes is the factory default setting.
WINS Server Address	Lets you view or change the current WINS Server Address
DNS Server Address	Lets you view or change the current DNS Server Address

IPv6 menu

Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information. Note: This menu is available only for network models or printers attached to print servers. This menu is available from the Network/Ports menu:

Understanding printer menus

107